How to Restore a Disabled iPhone Using 3uTools?

Problem Description:

If you enter the wrong passcode on an iOS device many times, your iDevice will be locked out and a message will show you that the iDevice is disabled. Unless you made a backup before you this operation, there is no way to save your iDevice’s data. enter image description here

Solutions:

This tutorial is mainly about how to restore a disabled iPhone using 3uTools.

Warm prompt:

  • If the disabled iPhone is in Normal Mode, 3uTools can not detect it, so please enter your iPhone in Recovery mode/DFU mode before flash.
  • If your iPhone is disabled, you can not back up the data on the iPhone.
  • This method can not bypass the iCloud lock.

Step 1: Connect your iPhone to PC using the USB cable, put your iDevice into Recovery/DFU mode so that 3uTools can detect it. Download link: https://www.3u.com/ enter image description here

Step 2: Click “Flash & JB" → Easy flash” → select the available iOS firmware for your iPhone→ click “Flash”.

Note: Do not select “ Retain User’s Data While Flashing”.

Step 3: 3uTools will automatically download the firmware and flash your iPhone, you just need to wait until this process ends. Besides, please keep a good connection between your iPhone and PC. enter image description here

Step 4: After this process is completed, please activate your iDevice using 3uTools or manually.

How to jailbreak iOS 14.3

Here’s how to jailbreak iOS 14.3 and also iPadOS 14.3 using the extremely popular checkra1n jailbreak utility that relies on the bootrom-based checkm8 exploit offering a lifetime jailbreak for specific devices.

In order to go through the process that you are about to read, you’ll need a compatible iPhone, iPad, or iPod touch running iOS 14.3 or iPadOS 14.3 as well as an Apple Mac computer in order to download and run the initial app that kicks off the whole process. enter image description here

Note: Checkra1n 0.12.2 beta currently offers the following support:

  • Official support for iOS 12.0 – 14.3
  • Official support for iOS/tvOS 14.3 (A8(X)-A9(X) running
  • iOS and iPadOS; all tvOS devices are supported)
  • Official support for Apple TV 4K breakout boards (Standard and Advanced)

Supported devices include:

  • iPhone 6s, 6s Plus, and SE

  • iPad 5th generation

  • iPad Air 2

  • iPad mini 4

  • iPad Pro 1st generation

  • Apple TV 4 and 4K

  • iBridge T2

The following devices aren’t currently supported but will be in a future update to checkra1n:

  • iPhone 7 and 7 Plus

  • iPad 6th and 7th generation

  • iPod touch 7

  • iPad Pro 2nd generation

  • iPhone 8, 8 Plus, and X

If you have taken the time to review all of the information above and still want to proceed with the jailbreaking of your iPhone or iPad running iOS 14.3 or iPadOS 14.3, then the process that you need is documented below:

Step 1: Head on over to checkra1n and download the latest version of the Checkra1n jailbreak tool to your Mac.

Step 2: Take the DMG file that comes with the download and install it to your /Applications folder.

Step 3: If Apple’s security settings won’t allow your Mac to open the application, then follow the steps below. Or, if everything opens as you would expect and no errors are shown on your display, then move to Step 4:

  • Head into the System Preferences app and select the Security & Privacy option.

  • Select “Open Anyway” followed by “Open” and enter your administrator password when prompted.

  • Try to run the checkra1n app again and you shouldn’t have any issues. Step 4: Launch the Checkra1n application from your /Applications folder. Now move into the Checkra1n Options and check the “Allow untested iOS/iPadOS/tvOS versions” option. Select Back. This will allow you to jailbreak iOS 14.3 and iPadOS 14.3 if the version of Checkra1n you are still using currently available does not officially support it yet. Latest checkra1n 0.12.2 does officially support iOS 14.3 so if you’re using that version of checkra1n then you don’t need to do this.

Step 5: Connect your device via a Lightning cable and then click the Start button and select OK. Ensure that the Checkra1n app is still running during the connection process.

Step 6: Select “Next” and then carry on through the process with the instructions that the Checkra1n app gives you. This will result in your device going into DFU Mode.

Step 7: The iPhone or iPad will reboot a few times during the process so don’t get concerned when that happens. Checkra1n is now pretty much in control of the process and will take the driver’s seat from here-on-in. enter image description here

Step 8: When the jailbreak process has all-but finished, you can unplug the Lightning cable and tap the checkra1n app on your device to launch the app. Tap Cydia and then Install Cydia to complete the process.

And the rest, as they say, is history. You will now be staring at a jailbroken iPhone or iPad running iOS/iPadOS 14.3.

Please Note

We won't take responsibility for any damage or loss they may cause 🤔

enter image description here


Packet Sniffing – Most of us might have heard this term either from a crazy hack-fiction movie or some report on malicious network attacks.

Well, judging by the name, it’s quite natural that we relate packet sniffing to something malicious but it’s not quite right when you understand it deeply.

A packet sniffing tool is a common accessory for network experts, security advisors to analyze the network and diagnose any network related issues or malicious breaches in the network.

While some of the malicious hackers use packet sniffers for analyzing someone else’s traffic and collecting sensitive information like passwords from your network bridge.

In this article, I won’t be covering how to attack your neighbor with these packet sniffing tools but will give you some basic intro on how these tools work and some free packet sniffing tools for Windows PC.

So, How Does Packet Sniffing Tools Work? A Packet sniffer can view and analyze a wide variety of information that is being transmitted over the network and it’s connected nodes. The packet sniffer can either be a software or hardware depending on the network infrastructure and can analyze sensitive information like usernames & passwords.

They scan both inbound and outbound traffic for all the information transmitted over the network. When the data passes through the system, it captures and stores it in memory to analyze it later.

The analyzed data is then converted to a human readable format so that the network experts can analyze the faults in their network. In layman terms, a packet analyzer is powerful enough to analyze all computers connected to a network and retrieve information like email contacts, messages, download history, browsing history and all audio/video activity on the network.

There are many types of packet sniffing like ARP sniffing, IP sniffing, MAC sniffing etc… So, technically, you can view and monitor all that is happening on your network. It’s pretty good to see who in your network is consuming more network traffic and what websites they’re visiting. Let’s see some free packet sniffing tools for Windows PC which are pretty powerful for home networks.

Wireshark is the most popular free packet sniffing tool for Windows and comes as both freeware and premium software with annual subscriptions. This tool is quite popular for its accuracy and flexibility and will give you an ability to see what’s happening on your network at a microscopic level.

Here are some of its popular features.

• Deep inspection of hundreds of protocols, with more being added all the time, thanks to the huge developer community.

• Live capture and offline analysis.

• Standard three-pane packet browser.

• Multi-Platform support. Apart from Windows, this tool can run on other operating systems such as Linux, OS X, Solaris, FreeBSD, NetBSD, and many other platforms.

• Captured network data can be browsed via a GUI, or via the TTY-mode TShark utility.

• Rich VoIP analysis.

• Decryption support for many protocols, including IPsec, ISAKMP, Kerberos, SNMPv3, SSL/TLS, WEP, and WPA/WPA2.

• Coloring rules can be applied to the packet list for quick, intuitive analysis.

• Output can be exported to XML, PostScript®, CSV, or plain text.

You can download this awesome tool from the official website – wireshark.org

How to GSM Unlock Sprint LG G5

enter image description here


If you own a Sprint G5 and are looking for a way to unlock your phone (of course, for free, thanks to the XDA Forum members vittger and hyelton) then this article is just for you.

This method does not require root.

How to GSM Unlock Sprint LG G5: Follow the below steps carefully to unlock your Sprint LG G5:

  1. Download the app named ‘HiddenMenuCall’ from here: Download

  2. Copy the APK file to your phone and install the app: o Make sure Settings > Security > Unknown Sources option is enabled. o Open a file manager of your choice and navigate to the place where the downloaded file is present. Tap on the APK file and install.

  3. Open the installed App.

  4. Scroll down and select ‘IOT(CDG2)’.

  5. Select LTE Settings > Operation Mode > Lab Network.

  6. Your device will now reboot. This is expected, do not worry.

  7. When the phone is switched back on, repeat the steps 3, 4 and 5 again.

  8. Make sure the option ‘Band25’ is enabled.

  9. Scroll down to LTE Data > Roam Config and enable all the bands towards the bottom in that menu as well.

  10. Go back to the app’s main menu. Select ModemProtocol > RAT Selection and choose ‘GSM/WCDMA/LTE Auto’.

  11. Reboot your device.

You now own a Sprint LG G5 LS992 GSM unlocked for both US and international GSM carriers!